Place a Call Using a Stored Number

1. Push “OnStar ready.”.. System responds:

“OnStar ready.”.

2. Say “Call <name tag>.” System responds: “OK, calling <name tag>.”

    See also:

    Tips and Troubleshooting Chart
    Problem Recommended Action No power. The ignition might not be turned to ON/RUN or ACC/ ACCESSORY. The picture does not fill the screen. There are black borders on t ...

    Increasing Speed While UsingCruise Control
    There are two ways to go to a higher speed: • Use the accelerator pedal to get to the higher speed. Press the button at the end of the lever, then release the button and the accelerator pedal. ...

    How to Check
    Use a good quality pocket-type gage to check tire pressure. You cannot tell if your tires are properly inflated simply by looking at them. Radial tires may look properly inflated even when they’ ...