Lamps
Properly working headlamps, taillamps, and brake lamps are important to see and be seen on the road.
• Signs that the headlamps need attention include dimming, failure to light, cracking, or damage.
The brake lamps need to be checked periodically to ensure that they light when braking.
• With a multi-point inspection, your dealer can check the lamps and note any concerns.
See also:
Setting Preset PTYs (RDS Only)
These buttons have factory PTY presets. Up to
12 PTYs (six FM1 and six FM2), can be
programmed on the six numbered pushbuttons, by
performing the following steps:
1. Press BAND to select FM1 or ...
Navigation
OnStar navigation requires the
Directions and Connections
service plan.
Push to receive directions or
have them sent to the vehicle
navigation screen. Destinations can
also be forwarded to ...
Taillamps and Back-Up Lamps
A. Taillamp
B. Back-up Lamp
To replace an auxiliary taillamp or back-up lamp bulb:
1. Open the trunk. See Trunk.
2. Remove the three fasteners from the trunk trim.
3. Pull back the trunk trim ...