Service and Maintenance
See also:
Leaving After Parking on a Hill
1. Apply and hold the brake pedal
while you:
1.1. Start the engine.
1.2. Shift into a gear.
1.3. Release the parking brake.
2. Let up on the brake pedal.
3. Drive slowly until the trailer is
...
Steps for Determining Correct Load Limit
1. Locate the statement “The
combined weight of
occupants and cargo should
never exceed XXX kg or
XXX lbs” on your vehicle's
placard.
2. Determine the combined
weight of the driver an ...
Storing the Tire Sealant and Compressor Kit
To access the tire sealant and
compressor kit:
1. Open the trunk. See Trunk.
2. Lift the cover.
With Pressure Relief Button
With Pressure Deflation Button
3. Turn the wing nut
countercloc ...
