Drive Systems
See also:
Starting the Vehicle
1. Aim the RKE transmitter at the
vehicle.
2. Press and release .
3. Immediately after completing
Step 2, press and hold until
the turn signal lamps flash, or for
about two seconds if the v ...
Steps for Determining Correct Load Limit
1. Locate the statement “The
combined weight of
occupants and cargo should
never exceed XXX kg or
XXX lbs” on your vehicle's
placard.
2. Determine the combined
weight of the driver an ...
Automatic Transmission Operation
There are several different positions for your gear
shift lever.
PARK (P): This position locks the rear wheels.
It is the best position to use when you start the
engine because your vehicle ...
