Adjusting the Fader and Balance
1. Press the TONE button.
2. Select Fader or Balance.
3. Select the value.
Press the 
BACK button to go
back to the Tone Settings menu.
See also:
Engine Compartment Fuse Block
To open the fuse block cover, press the clips at the front and back and rotate
the cover up to the side.
Notice: Spilling liquid on any electrical component on the vehicle may damage
it. Always ...
Fabric/Carpet
Use a vacuum cleaner with a soft brush attachment
frequently to remove dust and loose dirt. A canister
vacuum with a beater bar in the nozzle may only
be used on floor carpet and carpeted floor ...
SBZA Detection Zones
The SBZA sensor covers a zone of
approximately one lane over from
both sides of the vehicle,
or 3.5m(11 ft). This zone starts at
each side mirror and goes back
approximately 5.0 m(16 ft). Th ...