Airbag Readiness Light
This light shows if there is an electrical problem. The system check includes the airbag sensor(s), passenger sensing system, the pretensioners, the airbag modules, the wiring, and the crash sensing and diagnostic module. For more information on the airbag system, see Airbag System.
The airbag readiness light comes on and stays on for several seconds when the vehicle is started. Then the light goes out.
WARNING!
If the airbag readiness light stays
on after the vehicle is started or
comes on while driving, it means
the airbag system might not be
working properly. The airbags in
the vehicle might not inflate in a
crash, or they could even inflate
without a crash. To help avoid
injury, have the vehicle serviced
right away.
See also:
Adding Coolant
If you need more coolant, add the proper
DEX-COOL® coolant mixture at the coolant
recovery tank.
CAUTION:
Turning the radiator pressure cap when
the engine and radiator are hot can allow
stea ...
Air Vents
Use the louvers located on the air
vents to change the direction of the
airflow.
To open the vent, move the
thumbwheel to . To close the vent,
move the thumbwheel to .
For vehicles with eAss ...
Headlamps
The headlamp wiring is protected by four fuses.
An electrical overload will cause a lamp to go
on and off. If this happens, have your headlamp
wiring checked right away. ...