Starter Switch Check
WARNING
When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured.
1. Before starting this check, be sure there is enough room around the vehicle.
2. Firmly apply both the parking brake and the regular brake.
See Parking Brake .
Do not use the accelerator pedal, and be ready to turn off the engine immediately if it starts.
3. For automatic transmission vehicles, try to start the engine in each gear. The vehicle should start only in P (Park) or N (Neutral). If the vehicle starts in any other position, contact your dealer for service.
For manual transmission vehicles, put the shift lever in Neutral, push the clutch pedal down halfway, and try to start the engine. The vehicle should start only when the clutch pedal is pushed down all the way to the floor. If the vehicle starts when the clutch pedal is not pushed all the way down, contact your dealer for service.
See also:
Instrument Cluster
English Cluster Shown, Metric Similar ...
Jump Starting
For more information about the vehicle battery, see Battery .
If the battery has run down, try to use another vehicle and some jumper cables
to start your vehicle. Be sure to use the following step ...
Features & Safety
The LaCrosse has yet to be crash-tested by the Insurance Institute for
Highway Safety. Standard safety features include antilock brakes, an electronic
stability system and six airbags. Seat-mounte ...
