Underbody Maintenance

Chemicals used for ice and snow removal and dust control can collect on the underbody. If these are not removed, corrosion and rust can develop on the underbody parts such as fuel lines, frame, floor pan, and exhaust system even though they have corrosion protection.

At least every spring, flush these materials from the underbody with plain water. Clean any areas where mud and debris can collect. Dirt packed in close areas of the frame should be loosened before being flushed.

Your dealer/retailer or an underbody car washing system can do this.

    See also:

    General Towing Information
    Only use towing equipment that has been designed for the vehicle. Contact your dealer or trailering dealer for assistance with preparing the vehicle for towing a trailer. See the following tra ...

    Floor Mats
    WARNING! If a floor mat is the wrong size or is not properly installed, it can interfere with the pedals. Interference with the pedals can cause unintended acceleration and/or increased stop ...

    Doing Your Own Service Work
    WARNING You can be injured and the vehicle could be damaged if you try to do service work on a vehicle without knowing enough about it. ► Be sure you have sufficient knowledge, experience, ...