Windshield and Wiper Blades
Clean the outside of the windshield with glass cleaner.
Clean the rubber blades using a lint free cloth or paper towel soaked with windshield washer fluid or a mild detergent. Wash the windshield thoroughly when cleaning the blades. Bugs, road grime, sap, and a buildup of vehicle wash/wax treatments may cause wiper streaking. Replace the wiper blades if they are worn or damaged.
Wipers can be damaged by:
• Extreme dusty conditions
• Sand and salt
• Heat and sun
• Snow and ice, without proper removal
See also:
SBZA Detection Zones
The SBZA sensor covers a zone of approximately one
lane over from both sides of the vehicle, 3.5 m (11 ft).
This zone starts at each side mirror and goes back
approximately 5 m (16 ft). The hei ...
At Each Fuel Fill
Engine Oil Level Check
Check the engine oil level and add the proper
oil if necessary.
Notice: It is important to check your oil
regularly and keep it at the proper level.
Failure to keep your ...
Automatic Dimming Rearview Mirrorwith Compass
Your vehicle may have an automatic-dimming
rearview mirror with a compass.
(On/Off): This is the
on/off button for the
automatic dimming feature and compass. ...