Windshield Washer Fluid
What to Use
When the vehicle needs windshield washer fluid, be sure to read the manufacturer’s instructions before use.
If the vehicle will be operating in an area where the temperature may fall below freezing, use a fluid that has sufficient protection against freezing.
Adding Washer Fluid
Open the cap with the washer symbol on it. Add washer fluid until the tank is full. See Engine Compartment Overview for reservoir location.
Notice:
• When using concentrated washer fluid, follow the
manufacturer’s instructions for adding water.
• Do not mix water with ready-to-use washer fluid.
Water can cause the solution to freeze and
damage your washer fluid tank and other parts of
the washer system. Also, water does not clean as
well as washer fluid.
• Fill the washer fluid tank only three-quarters full
when it is very cold. This allows for fluid
expansion if freezing occurs, which could
damage the tank if it is completely full.
• Do not use engine coolant (antifreeze) in your
windshield washer. It can damage the vehicle’s
windshield washer system and paint.
See also:
Remote Keyless Entry (RKE) System
See Radio Frequency Statement for information regarding Part 15 of the
Federal Communications Commission (FCC) rules and Industry Canada Standards RSS-GEN/210/220/310.
If there is a decrease ...
Storing an XM Channel as a Favorite
Channels from all bands can be stored in any order in the favorite pages.
Up to six channels can be stored in each favorite page and the number of available
favorite pages can be set.
Storing a Ch ...
Power Door Locks
Power Door Locks
(Unlock): Press to unlock all
doors.
(Lock): Press to lock all doors.
See “Power Door Locks” in Vehicle
Personalization. ...