What to Use

WARNING:
Adding only plain water to the cooling system can be dangerous. Plain water, or some other liquid such as alcohol, can boil before the proper coolant mixture will. The vehicle’s coolant warning system is set for the proper coolant mixture. With plain water or the wrong mixture, the engine could get too hot but you would not get the overheat warning. The engine could catch fire and you or others could be burned. Use a 50/50 mixture of clean, drinkable water and DEX-COOL® coolant.

Use a 50/50 mixture of clean, drinkable water and DEX-COOL coolant. If using this mixture, nothing else needs to be added. This mixture:

• Gives freezing protection down to −34°F (−37°C), outside temperature.

• Gives boiling protection up to 265°F (129°C), engine temperature.

• Protects against rust and corrosion.

• Will not damage aluminum parts.

• Helps keep the proper engine temperature.

6-

Notice: If an improper coolant mixture is used, the engine could overheat and be badly damaged.

The repair cost would not be covered by the vehicle warranty. Too much water in the mixture can freeze and crack the engine, radiator, heater core, and other parts.

Notice: If extra inhibitors and/or additives are used in the vehicle’s cooling system, the vehicle could be damaged. Use only the proper mixture of the engine coolant listed in this manual for the cooling system. See Recommended Fluids and Lubricants for more information.

    See also:

    Bulb Replacement
    For the proper type of replacement bulbs, see Replacement Bulbs. For any bulb changing procedure not listed in this section, contact your dealer/retailer. ...

    Manual Mode
    Driver Shift Control (DSC) Notice: Driving with the engine at a high rpm without upshifting while using Driver Shift Control (DSC), could damage the vehicle. Always upshift when necessary while u ...

    Battery Voltage
    This display, available on some vehicles, shows the current battery voltage. If the voltage is in the normal range, the value will display. For example, the display may read Battery Voltage 1 ...