Checking Coolant
The vehicle must be on a level surface when checking the coolant level.
Check to see if coolant is visible in the coolant recovery tank. If the coolant inside the coolant recovery tank is boiling, do not do anything else until it cools down.
If coolant is visible but the coolant level is not at or above the FULL COLD mark, add a 50/50 mixture of clean, drinkable water and DEX-COOL® coolant at the coolant recovery tank, but be sure the cooling system is cool before this is done. See Engine Coolant (4.6L Engine) or Engine Coolant (3.9L Engine) for more information.
If no coolant is visible in the surge tank, add coolant as follows:
See also:
Starting the Vehicle
1. Aim the RKE transmitter at the
vehicle.
2. Press and release .
3. Immediately after completing
Step 2, press and hold until
the turn signal lamps flash, or for
about two seconds if the v ...
Hill Start Assist (HSA)
Some vehicles have a Hill Start Assist (HSA) feature, which may be useful when
the vehicle is stopped on a grade. This feature is designed to prevent the vehicle
from rolling, either forward or re ...
XM Messages
XL (Explicit Language
Channels): These channels, or any
others, can be blocked by request,
by calling 1-800-929-2100 in the
U.S., and 1-877-438-9677 in
Canada.
XM Updating: The encryption c ...