To Transfer Audio to the In-Vehicle Bluetooth System
The cellular phone must be paired and connected with the Bluetooth system before a call can be transferred.
The connection process can take up to two minutes after the key is turned to the ON/RUN or ACC/ACCESSORY position.
During a call with the audio on the cell phone, press
for more than two seconds. The audio switches from the
cell phone to the vehicle.
See also:
Footnotes — Maintenance Schedule Additional Required Services — Normal
a) Check all fuel and vapor lines and hoses for proper hook-up, routing, and
condition. Check that the purge valve, if the vehicle has one, works properly. Replace
as needed.
b) Or every four yea ...
Without Selective Ride Control
1. Move the shift lever to the left
from D (Drive).
The transmission will enter
Manual Mode. The DIC gear
indicator will change to an M
followed by a number
representing the gear the vehicl ...
How the System Works
URPA comes on automatically when the shift lever
is moved into R (Reverse). The rear display briefly
illuminates to indicate the system is working.
URPA operates only at speeds less than 8 km/h
...