Using the Delete All Name Tags Command
The delete all name tags command deletes all stored phone book name tags and route name tags for OnStar (if present).
To use the delete all name tags command:
1. Press and hold
for two seconds.
The system
responds with “Ready” followed by a tone.
2. Say “Delete all name tags”. The system responds with “You are about to delete all name tags stored in your phone directory and your route destination directory. Are you sure you want to do this? Please say yes or no.” • Say “Yes” to delete all name tags.
• Say “No” to cancel the function and return to the main menu.
See also:
Checking Brake Fluid
The brake/clutch fluid can be checked without taking off the cap by looking at the brake/clutch fluid reservoir.
The fluid level should be above MIN. If it is not, have the brake/ clutch hydraulic sy ...
Turn Signal/Multifunction Lever
The lever on the left side of the steering column
includes the following:
: Turn and Lane-Change Signals
: Headlamp High/Low-Beam Changer
: Windshield Wipers
: Windshield Washer
Flash-To- ...
Object Detection System Messages
PARK ASSIST OFF
This message is displayed when the park assist system has been turned off. See Ultrasonic Parking Assist
.
SERVICE PARK ASSIST
This message is displayed if there is a problem with ...
