Six-Disc CD (MP3) Player
To set the time and date:
1. Turn the ignition key to ACC/ACCESSORY or
ON/RUN. Press 
to turn the radio
on.
2. Press MENU.
3. Press the softkey below the 
tab. The HR, MIN,
MM, DD, YYYY displays.
4. Press the softkey below any one of the tabs you want to change.
5. To increase the time or date, do one of the following:
• Press the softkey located below the selected tab.
• Press 
SEEK, or
FWD.
• Turn 
clockwise.
6. To decrease the time or date, do one of the following:
• Press 
SEEK or
REV.
• Turn counterclockwise.
The date does not automatically display. To see the date
press MENU and then softkey below the
tab while the
radio is on. The date with display times out after a few
seconds and goes back to the normal radio and time
display.
To change the time default setting from 12 hour to 24 hour or to change the date default setting from month/day/year to day/month/year:
1. Press MENU, and then the softkey below the
tab. The HR, MIN, MM, DD, YYYY
displays.
2. Press the softkey below the forward arrow tab. The time 12H and 24H, and the date MM/DD/YYYY (month, day, and year) and DD/MM/YYYY (day, month, and year) displays.
3. Press the softkey located below the desired option.
4. Press MENU again to apply the selected default, or let the screen time out.
See also:
Tire Rotation
Tires should be rotated every
12 000 km (7,500 mi). See
Maintenance Schedule.
Tires are rotated to achieve a
uniform wear for all tires. The
first rotation is the most
important.
Any time ...
Introduction
GENERAL MOTORS, GM, the GM Emblem, BUICK, the
BUICK Emblem, and the name LUCERNE are
registered trademarks of General Motors Corporation.
This manual describes features that may or may not be ...
Parking over Things That Burn
WARNING
Things that can burn could touch hot exhaust parts under the vehicle and ignite. Do not park over papers, leaves, dry grass, or other things that can burn. ...