SBZA Detection Zones
The SBZA sensor covers a zone of approximately one lane over from both sides of the vehicle, 3.5 m (11 ft).
This zone starts at each side mirror and goes back approximately 5 m (16 ft). The height of the zone is approximately between 0.5 m (1.5 ft) and 2.0 m (6 ft) off the ground.
The SBZA detection zones do not change if the vehicle is towing a trailer. So be extra careful when changing lanes while towing a trailer.
See also:
Removal and Installation of the
Sealant Canister
To remove the sealant canister:
1. Remove the plastic cover.
2. Unscrew the connector (B) from
the canister (A).
3. Pull up on the canister (A) to
remove it.
4. Replace with a new canister
...
Service Parts Identification Label
This label, located either in the glove box or the trunk area, has the following
information:
Vehicle Identification Number (VIN).
Model designation.
Paint information.
Production options ...
Power Steerin
If power steering assist is lost because the engine stops or the power steering system is not functioning, the vehicle can be steered but it will take more effort. ...