Remote Keyless Entry (RKE) System
See Radio Frequency Statement for information regarding Part 15 of the Federal Communications Commission (FCC) Rules and RSS-210/211 of Industry and Science Canada.
Changes or modifications to this system by other than an authorized service facility could void authorization to use this equipment.
If there is a decrease in the RKE operating range, try this:
• Check the distance. The transmitter may be too far from the vehicle. Stand closer during rainy or snowy weather.
• Check the location. Other vehicles or objects may be blocking the signal. Take a few steps to the left or right, hold the transmitter higher, and try again.
• Check the transmitter’s battery. See “Battery Replacement” later in this section.
• If the transmitter is still not working correctly, see your dealer/retailer or a qualified technician for service.
See also:
Fuel Additives
To provide cleaner air, all gasolines in the United States are now required to contain additives that help prevent engine and fuel system deposits from forming, allowing the emission control system to ...
Programming Universal Home Remote
Follow these steps to program up to three channels:
1. Press and hold down the two outside
Universal Home Remote buttons, releasing
only when the Universal Home Remote
indicator light begins to ...
If the HUD Image Is Not Clear
• Is the HUD image too bright?
• Are the windshield and HUD
lens clean?
If the HUD image is not correct,
contact your dealer.
Keep in mind that the windshield is
part of the HUD system. ...