Washing Your Vehicle
The paint finish on the vehicle provides beauty, depth of color, gloss retention, and durability.
The best way to preserve the vehicle’s finish is to keep it clean by washing it often with lukewarm or cold water.
Do not wash the vehicle in the direct rays of the sun. Use a car washing soap. Do not use strong soaps or chemical detergents. Be sure to rinse the vehicle well, removing all soap residue completely.
Approved cleaning products can be obtained from your dealer. See Vehicle Care/Appearance Materials on page 462. Do not use cleaning agents that are petroleum based, or that contain acid or abrasives. All cleaning agents should be flushed promptly and not allowed to dry on the surface, or they could stain. Dry the finish with a soft, clean chamois or an all-cotton towel to avoid surface scratches and water spotting.
High pressure car washes may cause water to enter the vehicle.
See also:
Brake Fluid
Your brake master
cylinder reservoir is
filled with DOT-3 brake
fluid.
There are only two reasons why the brake fluid
level in the reservoir might go down. The first
is that the brake fluid go ...
Emissions Inspection and Maintenance
Programs
Some state/provincial and local governments have or
might begin programs to inspect the emission control
equipment on the vehicle. Failure to pass this inspection
could prevent getting a vehicle ...
Windshield and Wiper Blades
Clean the outside of the windshield
with glass cleaner.
Clean rubber blades using a lint-free
cloth or paper towel soaked with
windshield washer fluid or a mild
detergent. Wash the windshield ...