Hood Release
1. To open the hood, first pull the handle with this symbol on it. It is located inside the vehicle under the instrument panel on the driver’s side.
2. Then go to the front of the vehicle and
release the secondary hood release.
3. Lift the hood, release the prop rod from its
retainer and put the prop rod into the slot
in the hood.
Before closing the hood, be sure all the filler caps are on properly. Then lift the hood to relieve pressure on the prop rod. Remove the prop rod from its slot in the hood and return the prop to its retainer. Lower the hood 6 to 8 inches (15 to 20 cm) above the vehicle and release it to latch fully. Check to make sure the hood is closed and repeat the process if necessary.
See also:
Checking Engine Oil
It is a good idea to check the engine oil level at each
fuel fill. In order to get an accurate reading, the oil must
be warm and the vehicle must be on level ground.
The engine oil dipstick handl ...
Symbols
The vehicle has components and labels that use symbols instead of text. Symbols are shown along with the text describing the operation or information relating to a specific component, control, message ...
Design story
The Buick Regal's sleek design blends the sweeping silhouette and proportions
of a coupe in a progressive package that suggests motion from all angles. Great
attention to detail complements that a ...