How to Change the Video Format when inthe Auxiliary Mode

Buick Rainier / Buick Rainier Owners Manual / Instrument Panel / Audio System(s) / Rear Seat Entertainment System / How to Change the Video Format when inthe Auxiliary Mode

The auxiliary input video format is preset to NTSC.

In some countries, the video format may be in the PAL system. To change the video format, perform the following:

1. Press the display menu button.
2. Press the down arrow button to highlight the Video Format option.
3. Press the enter button to select Video Format.
4. Press the right or left arrow button to select the desired video format.
5. Press the enter button to accept the change.

    See also:

    If No Steam Is Coming From YourEngine
    If you get an engine overheat warning but see or hear no steam, the problem may not be too serious. Sometimes the engine can get a little too hot when you: • Climb a long hill on a hot day. â ...

    If the Light Is On Steady
    You may be able to correct the emission system malfunction by considering the following: Did you recently put fuel into your vehicle? If so, reinstall the fuel cap, making sure to fully install ...

    Finish Care
    Occasional waxing or mild polishing of the vehicle by hand may be necessary to remove residue from the paint finish. Approved cleaning products can be obtained from your dealer. If the vehicle has a ...