Parking Brake
To set the parking brake, hold the regular brake pedal down with your foot and pull up on the parking brake lever located between the seats.
If the ignition is on, the brake system warning light on the instrument panel cluster will come on.

To release the parking brake, hold the regular brake pedal down. Pull the parking brake lever up until you can press in the button at the end of the lever. Hold the button in as you move the parking brake lever all the way down.
Notice: Driving with the parking brake on can overheat the brake system and cause premature wear or damage to brake system parts. Verify that the parking brake is fully released and the brake warning light is off before driving.
If you are towing a trailer and you must park on a hill.
See also:
RDS Messages
INFO (Information): If the current station has a
message, the information symbol displays.
Press this button to see the message. The
message can display the artist, song title, call in
phone num ...
Ignition Positions
Use the key to turn the ignition switch to four
different positions.
A (LOCK): This position locks the ignition and
transmission. It is a theft-deterrent feature. You will
only be able to remo ...
Brake Fluid
The brake master cylinder reservoir
is filled with DOT 3 brake fluid as
indicated on the reservoir cap. See
Engine Compartment Overview for the location of the
reservoir.
There are only two ...
