Clock
The infotainment system controls are used to access the time and date settings through the menu system. See Operation for information about how to use the menu system.
Setting the Time and Date
1. Press the CONFIG button and select Time and Date Settings.
2. Select Set Time or Set Date.
3. Turn the 
knob to adjust the highlighted value.
4. Press the 
knob to select the next value.
5. To save the time and return to the Time Settings menu, press the BACK button at any time or press the 
knob after adjusting the minutes.
Setting the 12/24 Hour Format
1. Press the CONFIG button and select Time and Date Settings.
2. Highlight 12/24 HR Format.
3. Press the knob to select the 12 hour or 24 hour display format.
Setting the Month and Day Format
1. Press the CONFIG button and select Time and Date Settings.
2. Highlight Month & Day format.
3. Press the knob to select DD/MM/YYYY (day/month/year), MM/DD/YYYY (month/day/year), or YYYY/MM/DD (year/month/ day) display format.
See also:
Key and Lock Messages
NO REMOTE DETECTED
This message displays when the
transmitter battery is weak on
vehicles with keyless access. See
“Starting the Vehicle with a Low
Transmitter Battery” under Remote
Key ...
Doing Your Own Service Work
WARNING
You can be injured and the vehicle could be damaged if you try to do service work on a vehicle without knowing enough about it.
► Be sure you have sufficient knowledge, experience, ...
Emergency Release for Opening Liftgate
1. Remove the trim plug, located on the inside of
the liftgate in the center, to expose the access
hole in the trim panel.
2. Use a tool to reach through the access hole in
the trim panel.
3. Pry ...