Headlamp High/Low-Beam Changer

(Headlamp High/Low-Beam Changer):

Push the turn signal/ lane change lever away from you and release, to turn the high(Headlamp High/Low-Beam Changer): Push the turn signal/ lane change lever away from you and release, to turn the high beams on.

To return to low beams, push the lever again or pull it toward you and release.

This indicator light turns on in the instrument panel cluster when the high-beam

This indicator light turns on in the instrument panel cluster when the high-beam headlamps are on.

    See also:

    When the System Does Not Seem to Work Properly
    The following messages may be displayed on the DIC: SERVICE PARK ASSIST: If this message occurs, take the vehicle to your dealer to repair the system. PARK ASSIST OFF: If the URPA system doe ...

    Keyless Unlocking
    With the RKE transmitter within 1m(3 ft), approach the door and pull the handle to unlock and open the door. If the transmitter is recognized, the door will unlock and open. Entering any door oth ...

    How to Add Coolant to the Coolant Surge Tank
    Notice: This vehicle has a specific coolant fill procedure. Failure to follow this procedure could cause the engine to overheat and be severely damaged. If no problem is found, check to see if cool ...