Airbag Readiness Light
This light shows if there is an electrical problem. The system check includes the airbag sensor(s), passenger sensing system, the pretensioners, the airbag modules, the wiring, and the crash sensing and diagnostic module. For more information on the airbag system, see Airbag System .
The airbag readiness light comes on and stays on for several seconds when the vehicle is started. Then the light goes out.
WARNING
If the airbag readiness light stays on after the vehicle is started or comes on while driving, it means the airbag system might not be working properly. The airbags in the vehicle might not inflate in a crash, or they could even inflate without a crash. To help avoid injury, have the vehicle serviced right away.
See also:
Sheet Metal Damage
If the vehicle is damaged and
requires sheet metal repair or
replacement, make sure the body
repair shop applies anti-corrosion
material to parts repaired or
replaced to restore corrosion
...
Lock Sensor
When all doors are closed and the ignition is off, the vehicle can be locked
by pressing this area on the door handle. This feature will be available for several
minutes after the vehicle has be ...
How to Add Coolant to the Coolant Surge Tank
Notice: This vehicle has a specific coolant fill procedure. Failure to follow
this procedure could cause the engine to overheat and be severely damaged.
If no problem is found, check to see if cool ...