Safety Locks

The vehicle may have power safety locks or manual safety locks. Power safety locks will lock the rear windows and not allow the rear doors to be opened from the inside.

Manual safety locks do not allow the rear doors to be opened from the inside.

Power Safety Locks

Press  to activate the safety

Press locks on the rear doors. The LED will illuminate. to activate the safety locks on the rear doors. The LED will illuminate.

This switch also disables the power window controls on the rear doors Press If the LED flashes, the feature may not be working properly. See “Rear Window Lockout” under Power Windows again to deactivate the safety locks on the rear doors. The LED will turn off.

If the LED flashes, the feature may not be working properly. See “Rear Window Lockout” under Power Windows .

Manual Safety Locks

Open the rear doors to access the safety locks on the inside edge of each door. To manually set the locks, insert a key into the slot and turn it to the horizontal position. the door can only be opened from the outside with the door unlocked. To return the door to normal operation, turn the slot to the vertical position.

Open the rear doors to access the safety locks on the inside edge of each door. To manually set the locks, insert a key into the slot and turn it to the horizontal position. the door can only be opened from the outside with the door unlocked. To return the door to normal operation, turn the slot to the vertical position.

    See also:

    Security Light
    The immobilizer light should come on briefly as the engine is started. If it does not come on, have the vehicle serviced by your dealer. If the system is working normally, the indicator ligh ...

    Compact Spare Tire
    WARNING Driving with more than one compact spare tire at a time could result in loss of braking and handling. This could lead to a crash and you or others could be injured. Use only one compact ...

    Storing a Flat or Spare Tire and Tools With a Screw in Fastener
    1. Turn the wrench counterclockwise to remove the fastener. 2. Replace the fastener with the one provided in the foam. 3. Turn the wrench clockwise to tighten the fastener. 4. Replace the ...