See also:

EPB Release
To release the EPB, place the ignition in the ON/RUN position, apply and hold the brake pedal, and push down momentarily on the EPB switch. If you attempt to release the EPB without the brak ...

Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps
A. Back-Up Lamp B. Turn Signal Lamp To replace one of these lamps: 1. Open the trunk. See Trunk. 2. Remove the fasteners and pull back the trunk trim. 3. Remove the four plastic wing nuts h ...

Electric Parking Brake Light
The parking brake status light comes on when the brake is applied. If the light continues flashing after the parking brake is released, or while driving, there is a problem with the Electric Parking ...