Storing the Tire Sealant and Compressor Kit
To access the tire sealant and compressor kit:
1. Open the trunk. See Trunk.
2. Lift the cover.
With Pressure Relief Button
With Pressure Deflation Button
3. Turn the wing nut counterclockwise to remove it.
4. Remove the tire sealant and compressor kit.
To store the tire sealant and compressor kit, reverse the steps.
See also:
Power Windows
Power Windows
Press the switch to lower the
window. Pull the switch up to
raise it.
The switches work when the ignition
is in ON/RUN or ACC/ACCESSORY, or in Retained
Accessory Power (RAP). ...
Tire Terminology and Definitions
Air Pressure: The amount of air inside the tire
pressing outward on each square inch of the
tire. Air pressure is expressed in pounds
per square inch (psi) or kilopascal (kPa).
Accessory Weight: ...
Exterior Lamp Controls
The exterior lamp control is located on the instrument panel on the outboard side of the steering wheel.
Turn the control to the following positions:
(Off): Turns off the exterior lamps. The ...