Parking on Hills
WARNING!
Parking the vehicle on a hill with
the trailer attached can be
dangerous. If something goes
wrong, the rig could start to move.
People can be injured, and both
the vehicle and the trailer can be
damaged. When possible, always
park the rig on a flat surface.
If parking the rig on a hill:
1. Press the brake pedal, but do not shift into P (Park) yet. Turn the wheels into the curb if facing downhill or into traffic if facing uphill.
2. Have someone place chocks under the trailer wheels.
3. When the wheel chocks are in place, release the brake pedal until the chocks absorb the load.
4. Reapply the brake pedal. Then apply the parking brake and shift into P (Park).
5. Release the brake pedal.
See also:
Introduction
GENERAL MOTORS, GM, the GM Emblem, BUICK, the
BUICK Emblem, and the name LUCERNE are
registered trademarks of General Motors Corporation.
This manual describes features that may or may not be ...
Wheels and Trim—Aluminum or Chrome
Use a soft, clean cloth with mild soap and water to clean the wheels. After rinsing
thoroughly with clean water, dry with a soft, clean towel. A wax may then be applied.
Keep the wheels clean using ...
Driving
The front-wheel-drive Verano gets a larger four-cylinder than the Cruze. It's
normally aspirated, as opposed to the Cruze's available turbocharged
four-cylinder, but it makes for smooth starts and ...