Making Turns
Notice:
Making very sharp turns
while trailering could cause the
trailer to come in contact with the
vehicle. The vehicle could be
damaged. Avoid making very
sharp turns while trailering.
When turning with a trailer, make wider turns than normal so the trailer will not strike soft shoulders, curbs, road signs, trees, or other objects. Use the turn signal well in advance and avoid jerky or sudden maneuvers.
See also:
Cleaning the Center Stack
Cleaning the Display
Notice: Using abrasive cleaners when cleaning glass surfaces could scratch the
glass. Use only a soft cloth and do not spray cleaner directly on the system as
it could affect ...
Sensor
The solar sensor, located on top of
the instrument panel near the
windshield, monitors the solar heat.
The climate control system uses the
sensor information to adjust the
temperature, fan sp ...
Trunk Deck Inboard Taillamp and Backup Lamp
Driver Side Shown, Passenger Side Similar
A. Backup Lamp
B. Taillamp
To replace any one of these bulbs:
1. Open the trunk.
2. Remove the push pins (A) retaining the trunk deck trim cover.
3. ...