Using ABS
Do not pump the brakes. Just hold the brake pedal down firmly and let ABS work. You might hear the ABS pump or motor operating and feel the brake pedal pulsate, but this is normal.
See also:
High-Beam On
The high-beam on light comes on when the high-beam headlamps are in use.
See Headlamp High/Low-Beam Changer for more information. ...
Safety Chains
Always attach chains between the vehicle and the
trailer. Cross the safety chains under the tongue of the
trailer to help prevent the tongue from contacting
the road if it becomes separated from ...
EPB Release
To release the EPB, place the ignition in the ON/RUN position, apply and hold
the brake pedal, and push down momentarily on the EPB switch. If you attempt to
release the EPB without the brake peda ...