Shifting out of Park

Automatic Transmission Shift Lock

The vehicle has an automatic transmission shift lock control system. The shift lock control system is designed to:

• Prevent ignition key removal unless the shift lever is in P (Park).

• Prevent movement of the shift lever out of P (Park), unless the ignition is in ON/RUN and the brake pedal is applied.

The shift lock is always functional except in the case of an uncharged or low voltage (less than 9-volt) battery.

If the vehicle has an uncharged battery or a battery with low voltage, try charging or jump starting the battery. See Jump Starting (On-board with eAssist Only) or Jump Starting (with or without eAssist).

If the shift lever cannot be moved out of P (Park):

1. Apply and maintain the regular brakes.

2. Turn the ignition to the ON/RUN position. See Ignition Positions (Key Access) or Ignition Positions (Keyless Access) for more information.

3. Let up on the shift lever and make sure the shift lever is pushed all the way into P (Park).

4. Press the shift lever button.

5. Move the shift lever into the desired gear.

If you still cannot move the shift lever from P (Park), consult your dealer or a professional towing service.

    See also:

    Programmable Automatic Door Locks
    Your vehicle is programmed so that, when the doors are closed, the ignition is on, and the shift lever is moved out of P (Park), all the doors will lock. The doors will unlock every time you sto ...

    Rear Climate Control System
    The lower buttons on the rear seat audio are used to adjust the rear seat climate controls. The temperature of the air coming through the rear outlets is determined by the front passenger’s temp ...

    Vehicle Storage
    Tires age when stored normally mounted on a parked vehicle. Park a vehicle that will be stored for at least a month in a cool, dry, clean area away from direct sunlight to slow aging. This area sh ...