DSP (Digital Signal Processing) Settings

Buick LaCrosse / Buick LaCrosse Owners Manual / Infotainment System / Introduction / Operation / DSP (Digital Signal Processing) Settings

For vehicles with DSP, it is used to provide a choice of different listening experiences.

The DSP settings for the radio with CD are:

• normal - Select this setting to adjust the audio for stereo mode. This provides the best sound quality for the driver seat first, with the front passenger second.

• hk surround - Select to enable hk surround. This produces a true 6.1 matrix surround from any two channel digital source.

This feature is not available in AM/FM radio mode.

The DSP settings for the radio with CD/DVD and MEM are:

• 2.0 normal - Select this setting to adjust the audio for stereo mode. This provides the best sound quality for the driver seat first, with the front passenger second.

• hk surround - Select to enable hk surround. This produces a true 6.1 matrix surround from any two channel digital source.

This feature is not available in AM/FM radio mode.

To adjust the DSP settings:

1. Press the TONE button.

2. Select DSP.

3. Select the setting.

Press the back to the Tone Settings menu. BACK button to go back to the Tone Settings menu.

    See also:

    Radio Messages
    CAL ERR (Calibration Error): The audio system has been calibrated for your vehicle from the factory. If CAL ERR displays, it means that the radio has not been configured properly for the vehicle a ...

    Passenger Airbag Status Indicator
    The vehicle has the passenger sensing system. See Passenger Sensing System for important safety information. The overhead console has a passenger airbag status indicator. When the vehicle is s ...

    Starting the Vehicle
    1. Aim the RKE transmitter at the vehicle. 2. Press and release . 3. Immediately after completing Step 2, press and hold until the turn signal lamps flash, or for about two seconds if the v ...