See also:

Using Universal Home Remote
Press and hold the appropriate button for at least half of a second. The indicator light will come on while the signal is being transmitted. ...

Using the Re-dial Command
1. Press . ► For vehicles without a navigation system, the system responds “Ready,” followed by a tone. ► For vehicles with a navigation system, the system responds with a tone. Aft ...

Headlamps, Front Turn Signal, andParking Lamps
To replace a bulb, do the following: 1. Open the hood. 2. Remove the grille by grasping and pulling it forward. 3. Lift the two headlamp retaining clips. 4. Pull the headlamp assembly away from ...