Setting the Month and Day Format
1. Press the CONFIG button and
select Time and Date Settings,
or press 
.
2. Highlight Set Date Format.
3. Press SELECT to select MM/DD/YY (month/day/year) or DD/MM/YY (day/month/year).
See also:
SBZA Detection Zones
The SBZA sensor covers a zone of approximately one
lane over from both sides of the vehicle, 3.5 m (11 ft).
This zone starts at each side mirror and goes back
approximately 5 m (16 ft). The hei ...
Recalling Button Memory
Positions
To recall the manually saved Button
Memory positions, press and hold
“1” or “2.” The driver seat and
outside mirrors move to the
positions stored to those buttons
when pressed. Relea ...
Manual Locks
From the outside, unlock the door using either the key
or the RKE transmitter.
From the inside, use the power door lock switches or
manual lock knobs located at the top of the door panel
near t ...