See also:

Compass Calibration Procedure
1. Before calibrating the compass, check that the compass zone is set to the variance zone in which the vehicle is located. See “Compass Variance (Zone) Procedure” earlier in this section. ...

Exterior Lighting
The exterior lamp control is located to the left of the steering column on the instrument panel. : Briefly turn to this position to turn the automatic lamp control off or on again. AUTO: Turn ...

Parking/Turn Signal Lamp
1. Open the hood. See Hood . 2. Remove the parking/turn signal lamp bulb socket from the headlamp assembly by turning counterclockwise. 3. Remove the bulb from the bulb socket by pulling it straig ...