Finish Damage

Any stone chips, fractures or deep scratches in the finish should be repaired right away. Bare metal will corrode quickly and may develop into major repair expense.

Minor chips and scratches can be repaired with touch-up materials available from your dealer/retailer. Larger areas of finish damage can be corrected in your dealer’s/retailer’s body and paint shop.

    See also:

    Removing the Flat Tire andInstalling the Spare Tire
    1. If your vehicle has a wheel cap that covers the wheel nuts, position the chisel end of the wheel wrench in the notch and pry it off. 2. Using the wheel wrench, loosen all the wheel nuts. ...

    High Intensity Discharge (HID) Lighting
    WARNING! The low beam high intensity discharge lighting system operates at a very high voltage. If you try to service any of the system components, you could be seriously injured. Have your ...

    Additional Required Services
    Every 12 000 km/7,500 Miles ► Rotate tires. Tires should be rotated every 12 000 km/ 7,500 miles. See Tire Rotation . At Each Fuel Stop ► Engine oil level check. See Engine Oil . ...