Setting the Clock

To set the time and date for the radio with CD (MP3):

1. Turn the ignition key to ACC/ACCESSORY or ON/RUN.

2. Press 3. Press and the HR, MIN, MM, DD, to turn the radio on.

3. Press YYYY (hour, and the HR, MIN, MM, DD, YYYY (hour, minute, month, day, and year) displays.

4. Press the softkey located below any one of the tabs that you want to change.

5. Increase or decrease the time or date by turning For detailed instructions on setting the clock for your clockwise or counterclockwise.

For detailed instructions on setting the clock for your specific audio system, see Setting the Clock.

    See also:

    Headlamp High/Low-Beam Changer
    (Headlamp High/Low-Beam Changer): Push the turn signal/lane change lever away from you and release, to turn the high beams on. To return to low beams, push the lever again or pull it toward y ...

    Easy Exit Driver Seat
    This feature moves the seat rearward allowing the driver more room to exit the vehicle. To activate, place the ignition in OFF and open the driver door. If the driver door is already open, pl ...

    TPMS Sensor Matching Process
    Each TPMS sensor has a unique identification code. The identification code needs to be matched to a new tire/wheel position after rotating the vehicle’s tires or replacing one or more of t ...