See also:

Using the Call Command
1. Press and hold for two seconds. The system responds with “Ready” followed by a tone. 2. Say “Call”. The system responds with “Call using <phone name>. Please say the name ta ...

When to Add Engine Oil
If the oil is below the cross-hatched area at the tip of the dipstick, add 1 L (1 qt) of the recommended oil and then recheck the level. See “Selecting the Right Engine Oil” in this section for ...

Headlamp High/Low-Beam Changer
(Headlamp High/Low-Beam Changer): Push the turn signal/ lane change lever away from you and release, to turn the high beams on. To return to low beams, push the lever again or pull it toward yo ...