Reporting Safety Defects

See also:

EPB Release
To release the EPB, place the ignition in the ON/RUN position, apply and hold the brake pedal, and push down momentarily on the EPB switch. If you attempt to release the EPB without the brak ...

Fog Lamps
To replace the front fog lamp bulb: 1. Locate the fog lamp located under the front fascia. 2. Disconnect the electrical connector from the fog lamp bulb assembly. 3. Remove the bulb by turning it c ...

Remote Keyless Entry (RKE) System
See Radio Frequency Statement  for information regarding Part 15 of the Federal Communications Commission (FCC) rules and Industry Canada Standards RSS-210/220/310. If there is a decrease in the ...