Fog Lamps
Use the fog lamps for better vision in foggy or misty conditions. The ignition must be in RUN for the fog lamps to work.
The fog lamp button is located on the instrument panel to the right of the exterior lamps knob.
Press the button to turn the fog lamps on.
Press the button again to turn them off. A light glows near the button while the fog lamps are on.
Fog lamps turn off whenever the high-beam headlamps are on.
Some localities have laws that require the headlamps to be on along with the fog lamps.
See also:
If No Steam Is Coming from
the Engine Compartment
If an engine overheat warning is
displayed but no steam can be seen
or heard, the problem might not be
too serious. Sometimes the engine
can get a little too hot when the
vehicle:
• Climb ...
Headlamp High/Low-Beam Changer
To change the headlamps from low beam to high
beam, push the turn signal lever away from you. To
change from high beam to low beam, pull the turn signal
lever toward you.
While the high beams ...
TPMS Sensor Matching Process
Each TPMS sensor has a unique identification code. The identification code needs to be matched to a new tire/wheel position after rotating the vehicle’s tires or replacing one or more of the TPMS se ...