See also:

Finding a Program Type (PTY) Station(RDS and XM™)
To select and find a desired PTY perform the following: 1. Press the TYPE button to activate program type select mode. TYPE and a PTY displays. 2. Turn the TYPE knob or press and release the TY ...

Headlamps, Front Turn Signal, andParking Lamps
To replace a bulb, do the following: 1. Open the hood. 2. Remove the grille by grasping and pulling it forward. 3. Lift the two headlamp retaining clips. 4. Pull the headlamp assembly away from ...

Unit
Move to switch between metric or US when the Unit display is active. Press SET/CLR to confirm the setting. This will change the displays on the cluster and DIC to either metric or English ( ...