Turn Signals When Towing a Trailer
The arrows on the instrument panel flash whenever signaling a turn or lane change. Properly hooked up, the trailer lamps also flash, telling other drivers the vehicle is turning, changing lanes, or stopping.
When towing a trailer, the arrows on the instrument panel flash for turns even if the bulbs on the trailer are burned out. For this reason you may think other drivers are seeing the signal when they are not. It is important to check occasionally to be sure the trailer bulbs are still working.
See also:
Trunk Deck Inboard Taillamp and Backup Lamp
Driver Side Shown, Passenger Side Similar
A. Backup Lamp
B. Taillamp
To replace any one of these bulbs:
1. Open the trunk.
2. Remove the push pins (A) retaining the trunk deck trim cover.
3. ...
Fog Lamps
To turn on the fog lamps, the ignition and the headlamps or parking lamps must be on.
If the fog lamps are turned on while the exterior lamp switch is in the AUTO position, the headlamps come on ...
Reducing Speed While Using
Cruise Control
If the cruise control system is
already activated:
• Move the thumbwheel toward
SET/− and hold until the desired
lower speed is reached, then
release it.
• To slow down in small am ...