Using ABS
Do not pump the brakes. Just hold the brake pedal down firmly and let ABS work. You might hear the ABS pump or motor operating and feel the brake pedal pulsate, but this is normal.
See also:
Headlamp High/Low-Beam Changer
(Headlamp High/Low-Beam
Changer): Push the turn signal/lane change lever away from you
and release, to turn the high beams
on. To return to low beams, push
the lever again or pull it toward y ...
Wipe Parking
If the ignition is turned to LOCK/OFF while the wipers are on 1, 2,
or , they will immediately stop.
If the windshield wiper lever is then
moved to before the driver door
is opened, or within ...
Height Adjustment
Height Adjustment
Press and hold the top or bottom of
the switch to raise or lower the seat.
Release the switch when the
desired height is reached. ...