Dual Tone Multi-Frequency (DTMF) Tones

The Bluetooth system can send numbers and the numbers stored as name tags during a call. You can use this feature when calling a menu-driven phone system. Account numbers can also be stored for use.

Sending a Number or Name Tag During a Call

1. Press followed by a tone.. The system responds “Ready,” followed by a tone.

2. Say “Dial.”

3. Say the number or name tag to send.

    See also:

    When to Add Engine Oil
    If the oil is below the cross-hatched area at the tip of the dipstick, add 1 L (1 qt) of the recommended oil and then recheck the level. See “Selecting the Right Engine Oil” in this section for ...

    OnStar® Steering Wheel Controls
    Your vehicle may have a Talk/Mute button that can be used to interact with OnStar® Hands-Free Calling. On some vehicles, you may have to hold the button for a few seconds and give the command ...

    When You Are Ready to Leave AfterParking on a Hill
    1. Apply your regular brakes and hold the pedal down while you: • start your engine, • shift into a gear, and • release the parking brake. 2. Let up on the brake pedal. 3. Drive slowly unt ...