Error Messages

If Disc Read Error displays and/or the disc comes out, it could be for one of the following reasons:

  • The disc has an invalid or unknown format.
  • The disc is not from a correct region.
  • The disc is very hot. Try the disc again when the temperature returns to normal.
  • The road is very rough. Try the disc again when the road is smoother.
  • The disc is dirty, scratched, wet, or upside down.
  • The air is very humid. Try the disc again later.
  • There was a problem while burning the disc.
  • The label is caught in the CD player.

If the CD is not playing correctly, for any other reason, try a known good CD.

If any error continues, contact your dealer.

    See also:

    RKE without Remote Start Shown
    RKE without Remote Start Shown (Lock): Press to lock all doors. The turn signal indicators may flash and/or the horn may sound to indicate locking, see “Locking Feedback” under Vehicle ...

    Removing the Flat Tire and Installing the Spare Tire
    1. Do a safety check before proceeding. See Changing a Flat Tire. 2. Turn the wheel wrench counterclockwise to loosen all the wheel nuts, but do no remove them yet. 3. Turn the jack handle cou ...

    Turn Signals When Towing a Trailer
    The arrows on your instrument panel will flash whenever you signal a turn or lane change. Properly hooked up, the trailer lamps will also flash, telling other drivers you’re about to turn, cha ...