How to Detect a Tamper Condition

If an attempted break-in occurred while the system was armed. is pressed and the horn sounds, an attempted break-in occurred while the system was armed.

If the alarm has been activated, a message will appear on the DIC. See Anti-theft Alarm System Messages  for additional information.

    See also:

    Erasing Universal Home RemoteButtons
    To erase programming from the three Universal Home Remote buttons do the following: 1. Press and hold down the two outside buttons until the indicator light begins to flash, after 20 seconds. Do ...

    Door Ajar Light
    For vehicles equipped with this light, it comes on when a door is open or not securely latched. Before driving, check that all doors are properly closed. See Door Ajar Messages  for more in ...

    Finish Care
    Occasional waxing or mild polishing of the vehicle by hand may be necessary to remove residue from the paint finish. Approved cleaning products can be obtained from your dealer. If the vehicle has a ...