StabiliTrak® System

The StabiliTrak system assists with directional control of the vehicle in difficult driving conditions. The system turns on automatically every time the vehicle is started.

► To turn off both traction control and StabiliTrak, press and hold the TCS/StabiliTrak button, located on the instrument panel, until illuminate in the instrument cluster and the appropriate DIC message is displayed. See Ride Control System Messages and . illuminate in the instrument cluster and the appropriate DIC message is displayed. See Ride Control System Messages .

► Press and release the TCS/ StabiliTrak button to turn on both systems.

For more information, see StabiliTrak® System .

    See also:

    Tire Inspection and Rotation
    Tires should be rotated every 5,000 to 8,000 miles (8 000 to 13 000 km). Any time you notice unusual wear, rotate your tires as soon as possible and check wheel alignment. Also check for damaged ...

    Removing the Flat Tire and Installing the Spare Tire
    1. Do a safety check before proceeding. See If a Tire Goes Flat for more information. 2. Turn the wheel wrench counterclockwise to loosen the wheel nut caps. If needed, finish loosening th ...

    Setting Preset PTYs (RDS Only)
    These pushbuttons have factory PTY presets. Up to 12 PTYs (six FM1 and six FM2), can be programmed on the six numbered pushbuttons, by performing the following steps: 1. Press BAND to select F ...