How the System Works
When the vehicle is started, both outside mirror displays will briefly come on to indicate that the system is operating. While driving forward, the left or right side mirror SBZA display will light up if a vehicle is detected in that blind zone. If you activate a turn signal and a vehicle has been detected on the same side, the SBZA display will flash to give you extra warning not to change lanes.
SBZA displays do not come on while the vehicle is approaching or passing other vehicles. At speeds greater than 32 km/h (20 mph), SBZA displays may come on when a vehicle you have passed remains in or drops back into the detection zone.
SBZA can be disabled through vehicle personalization. See Vehicle Personalization for more information. If the SBZA is disabled by the driver, the SBZA mirror displays will not light up during normal driving.
See also:
Setting the Clock (Radio with CD)
To set the time:
1. Press the CONFIG button and select Time Settings or press
.
2. Select Set Time.
3. Turn the TUNE/MENU knob to adjust the highlighted number.
4. Press TUNE/MENU to select the n ...
Windows
Press the switch to lower the
window. Pull the switch up to
raise it.
For more information, see Power
Windows. ...
Canceling a Remote Start
To cancel a remote start:
• Aim the RKE transmitter at the vehicle and press
and hold until the parking lamps
turn off.
• Turn on the hazard warning flashers.
• Turn the ignition switch ...