Driver Shift Control (DSC)
Notice:
Driving with the engine at
a high rpm without upshifting
while using Driver Shift Control
(DSC), could damage the vehicle.
Always upshift when necessary
while using DSC.
DSC allows you to shift an automatic transmission similar to a manual transmission. To use the DSC feature:
See also:
Overheated Engine Protection
Operating Mode
If an overheated engine condition exists and the
message ENGINE OVERHEATED STOP ENGINE is
displayed, an overheat protection mode which alternates
firing groups of cylinders helps prevent engine ...
Jump Starting
For more information about the vehicle battery, see Battery .
If the battery has run down, try to use another vehicle and some jumper cables
to start your vehicle. Be sure to use the following step ...
Taillamps and Back-Up Lamps
A. Taillamp
B. Back-up Lamp
To replace an auxiliary taillamp or back-up lamp bulb:
1. Open the trunk. See Trunk.
2. Remove the three fasteners from the trunk trim.
3. Pull back the trunk trim ...