Connecting and Controlling a USB Drive (Radio with CD and Radio with CD/DVD/MEM)
The infotainment system can only play back .mp3 and .wma files from a USB drive.
Only the first 2,500 songs are recognized on the device.
When a device is not supported, the message “No supported data found.
You can safely disconnect the device” appears.
Connecting a USB Drive
Connect the USB drive to the USB port.
Searching for a Track
It is normal for the search feature to take some time to display the information after reading the device due to the amount of information stored.
Files that do not have any meta data stored in the ID3 tag display as Unknown.
Tracks can be searched for by:
• Playlists*
• Artists
• Albums
• Song Titles
• Genres
• Folder View
*This only displays if a playlist is found on the device.
To search for tracks:
1. Turn the Menu knob.
2. Select Search.
3. Select: Playlists, Artists, Albums, Song Titles, Genres, or Folder View.
4. Select the track.
Shuffle Functionality
Turn the Menu knob and set Shuffle Songs (Random) to On or Off.
On: Plays current tracks in random order.
Off: Plays current tracks in sequential order.
Repeat Functionality
Turn the Menu knob and set Repeat to On or Off.
Repeat On: Repeats the current track.
Repeat Off: Playback starts from the beginning of the current track after the last track finishes.
See also:
Compass Calibration Procedure
1. Before calibrating the compass, check that the
compass zone is set to the variance zone in
which the vehicle is located. See “Compass
Variance (Zone) Procedure” earlier in this section.
...
Fuses and Circuit Breakers
The wiring circuits in the vehicle are protected from short circuits by a combination of fuses and circuit breakers. This greatly reduces the chance of damage caused by electrical problems.
To check ...
EPB Release
To release the EPB, place the
ignition in the ON/RUN position,
apply and hold the brake pedal, and
push down momentarily on the EPB
switch. If you attempt to release the
EPB without the brak ...